Brand guide

Azenco pergolas in Phoenix: R-Blade, K-Bana and what they cost

Azenco’s own guide puts its motorized R-Blade at $15,000–$30,000 or more and its manual K-Bana at $6,000–$12,000 to start, and the K-Bana page lists $9,999 for the unit. In Phoenix, premium louvered brands quote at $18,000–$34,000 for a 12×12-class system. Azenco, R-Blade and K-Bana are trademarks of Azenco Outdoor; this is an independent guide with no affiliation to the brand or its dealers.

Published · 5 min read · By Phoenix Louvered Pergolas

In the Phoenix metro: louvered pergolas from about $12,000, with a written quote before any work. Installation is done by a licensed Arizona contractor. Phoenix, Scottsdale, Mesa, Gilbert, Chandler, Tempe, Glendale, Peoria, Paradise Valley, Queen Creek. Call (602) 557-3625

What Azenco makes

Azenco Outdoor sells four aluminum roof systems. Two are louvered pergolas, and they sit at opposite ends of the price range.

  • R-Blade. The flagship motorized louvered pergola. Azenco lists it at wind loads up to 190 mph and snow loads up to 100 pounds per square foot, with dual-wall louvers that close gapless, built-in gutters, concealed hardware, smart weather sensors and a Miami-Dade County product approval, one of the strictest wind standards in the country.
  • K-Bana. A manual louvered pergola in two sizes, 10×10 and 12×12 at 8 feet tall, rated to 105 mph wind and 25 pounds per square foot of snow, with an integrated gutter. The louvers turn by hand, so it needs no power, and the units can be combined for a larger footprint.
  • R-Breeze and R-Shade. A fixed slatted roof for partial shade, and a solid insulated roof for a year-round outdoor room. Neither is louvered, but a dealer may quote them beside the R-Blade.

Dealers sell the R-Blade with app, remote and smart-home control. Azenco says the K-Bana is made in the USA, and both systems carry a powder-coat finish.

Side-view diagram: aluminum blades rotate on a frame with built-in gutters; a motor turns the blades on motorized systems; rain drains down through the powder-coated aluminum posts, which sit on concrete footings below grade.
The parts of a louvered pergola: rotating aluminum blades, a frame with built-in gutters, posts that carry rain down, and concrete footings.

What an Azenco pergola costs

FigurePublished rangeSource
R-Blade, motorized, per project$15,000–$30,000 or moreAzenco Outdoor
K-Bana, manual, to start$6,000–$12,000Azenco Outdoor
K-Bana list price, unit$9,999Azenco Outdoor
Premium brands in Phoenix, 12×12 class$18,000–$34,000AE Outdoor Living
Premium brands, per sq ft$120–$200EDG Patio Shade

Azenco’s ranges are the manufacturer’s own and cover the system, not the footing, electrical, engineering or permit, which the installer quotes separately. The K-Bana list price is for the unit; installation and any pad or footings are extra.

The K-Bana is the only mainstream louvered system with a published unit price, which makes it easy to compare against a manual louvered pergola from any other maker. The R-Blade competes with StruXure’s Pergola X at the top of the market.

Illustration looking up at a louvered pergola roof: parallel aluminum blades partly open inside a beam with a built-in gutter.
Illustration: the blades rotate inside a frame with a built-in gutter.

How it handles Phoenix heat and monsoons

The R-Blade’s published wind rating is far above anything a Valley monsoon produces, and its sensors can close the roof when rain or wind arrives. The K-Bana’s 105 mph rating also clears a typical microburst, but it has no motor, so it stays in whatever position you left it. The Arizona heat and monsoon guide covers what those storms do to roofs and furniture.

Ratings are the manufacturer’s; the number that governs your yard is the engineered rating for your footprint and attachment, which comes with the permit. Every wired system needs an electrical permit in the Valley, and an attached one is a patio cover under most city rules; the permit guide has each city.

The Azenco warranty

Open Air Construction, an Azenco dealer, lists the R-Blade warranty as 15 years on aluminum structural components, 5 years on motors and 3 years on electronic and electrical components, plus its own one-year labor warranty. Other dealers publish different terms, so treat any figure as the dealer’s until you have the manufacturer’s written schedule for your system. Ask who services the motor locally and how long parts take to arrive.

Buying an Azenco in Phoenix: what to ask

Azenco sells through certified dealers, and the installer must hold an Arizona Registrar of Contractors license; the hiring guide explains the check. Ask for:

  • Which system is quoted, R-Blade or K-Bana, and for the K-Bana whether one unit or a combined pair.
  • The engineered wind rating for your site, not the catalog figure.
  • Where the integrated gutter drains, and whether a downspout runs through a post.
  • Electrical scope itemized, including sensors and smart-home integration.
  • The manufacturer’s warranty schedule and the dealer’s labor warranty, both in writing.

Azenco vs. StruXure vs. Equinox

Azenco R-BladeStruXure Pergola XEquinox Louvered Roof
Published cost$15,000–$30,000 or more per project$150–$200 per sq ft installed$65–$100 per sq ft installed
Manual optionK-Bana, with a list priceOn some models; ask the dealerMotorized is standard
Published ratingsWind to 190 mph, snow to 100 lb per sq ftEngineered per siteLouvers rotate up to 160 degrees
Warranty15 years structure, 5 motors, 3 electronicsLimited lifetime, transferable20-year limited on louvers, beams, gutters, posts

The StruXure guide and the Equinox guide go into each system.

Sources

Prices are published figures, not quotes; checked September 29–30, 2026. Permit rules are paraphrased from each city’s own guidance, and they change, so the installer confirms them for your address.

Prices

Permit rules

Questions homeowners ask

How much does an Azenco R-Blade cost?

Azenco’s own guide gives $15,000–$30,000 or more for a motorized R-Blade, before the installer’s footing, electrical, engineering and permit lines. Phoenix dealers quote premium louvered brands at $18,000–$34,000 for a 12×12-class system.

What does the K-Bana cost?

Azenco lists the K-Bana at $9,999 for the unit, and its guide gives $6,000–$12,000 as a starting range. It comes in 10×10 and 12×12 only.

Is the K-Bana a real louvered pergola?

Yes. The roof louvers rotate open and closed by hand, with an integrated gutter; it just has no motor, so it needs no electrical permit.

Is this site affiliated with Azenco?

No. Azenco, R-Blade and K-Bana are trademarks of Azenco Outdoor. This is an independent guide, and the installer who quotes you decides which systems to offer.

More answers in the pergola and patio cover FAQ, or see how a request works.

Get a written quote

Leave your name and number. A licensed installer calls you back, visits to measure, and quotes the job in writing before any work starts.

Call (602) 557-3625

Installation is done by a licensed Arizona contractor.