Cost guide

Louvered pergola cost in Phoenix (2026)

A louvered pergola of about 12×12 feet costs $12,000–$34,000 installed in the Phoenix metro, depending mostly on the brand, and a 14×20 with fans, lights and heaters runs $32,000–$55,000. Standard motorized systems cost less than the premium brands most Valley dealers sell.

Published · 5 min read · By Phoenix Louvered Pergolas

In the Phoenix metro: louvered pergolas from about $12,000, with a written quote before any work. Installation is done by a licensed Arizona contractor. Phoenix, Scottsdale, Mesa, Gilbert, Chandler. Call (602) 557-3625

How much does a louvered pergola cost in Phoenix?

For a professionally installed system in the Phoenix metro, published prices run $12,000–$34,000 for about 12×12 feet and $32,000–$55,000 for a 14×20 with fans, lights and heaters wired in. The spread within each size is mostly the brand: standard aluminum systems sit at the low end, and premium systems such as StruXure, Renson and Equinox at the high end.

SizeTypical installed rangeWhat that usually means
About 10×14 to 12×12 ft$12,000–$34,000Standard aluminum systems from about $12,000; premium brands (StruXure, Renson, Equinox) $18,000–$34,000
14×20 ft, with fans, lights and heaters$32,000–$55,000Motorized louvers, add-ons wired through the frame
Larger or customUp to $85,000+Multi-zone systems, screens, heaters and integrated lighting
Illustration of a louvered aluminum pergola attached to a Phoenix home, blades open over a patio dining table.
Illustration: a louvered pergola's blades rotate open to let light and air through.

Louvered pergola cost by system

A 12×12 louvered pergola can cost several times more depending on the system. National per-square-foot figures show where each tier sits; Phoenix dealer prices for premium brands match the top of that range.

System12×12 installedPer sq ftWhat you get
Kit you assemble (not installed)$1,000–$10,000Kit price onlyNo footings, permits, electrical or labor
Manual louvers, installedAbout $6,500–$15,800$45–$110Hand crank; 12×12 figure is 144 sq ft at the per-foot range
Motorized louvers, installed$7,900–$18,000$55–$125Remote or wall switch
Motorized with rain and wind sensors$10,800–$25,200$75–$175Opens and closes automatically; app control
Premium architectural brands$18,000–$34,000$120–$200StruXure, Renson, Equinox; dealer-installed

A kit’s price leaves out footings, permits, electrical work and labor. Check a kit’s wind rating against local monsoon conditions before you buy.

Range chart of installed cost per square foot: lattice or solid aluminum patio cover from $25 to $30 (Phoenix starting prices); insulated patio cover $40 to $55; fixed aluminum pergola $47 to $84; manual louvered pergola $45 to $110; motorized louvered $55 to $125; motorized with sensors $75 to $175; premium louvered brands $120 to $200.
Installed cost per square foot: patio covers start around $25; louvered pergolas run $45–$200 depending on the system.

What moves the price of a louvered pergola

  • Brand and system. Premium architectural systems cost roughly twice what standard motorized systems do for the same footprint.
  • Size. Cost scales with roof area, so a 14×20 costs well over a 12×12 before any add-ons.
  • Manual or motorized louvers. A motor adds the drive and an electrical circuit; rain and wind sensors add more.
  • Add-ons. Two ceiling fans wired through the structure add $1,400–$3,000; lights, heaters and side screens add more.
  • Attached or freestanding. Freestanding systems need four posts and footings; attached systems need a sound wall or fascia to mount to.
  • Footings and site work. Pavers, slab condition and equipment access change the labor.
  • Permits and HOA review. Fees, drawings and review time add cost, and the rules vary by city.
Illustration looking up at a louvered pergola roof: parallel aluminum blades partly open inside a beam with a built-in gutter.
Illustration: the blades rotate inside a frame with a built-in gutter.

What’s included in a louvered pergola quote, and what’s extra

A louvered pergola quote usually includes the aluminum frame, rotating blades, built-in gutters and footings; electrical work, permits, HOA submittals and add-ons are usually quoted separately.

Usually includedQuoted separatelyNot offered
  • Powder-coated aluminum frame, posts and beams
  • Rotating roof louvers, by hand crank or motor
  • Gutters built into the frame that drain rain down the posts
  • Footings or anchors for the posts
  • Electrical work for motors, lights and fans
  • Permits and HOA submittals
  • Add-ons: lights, fans, heaters and side screens
  • Concrete or paver work beyond the post footings
DIY kits, shade sails and commercial projects

Scope varies by installer, so compare written, itemized quotes line by line.

Side-view diagram: aluminum blades rotate on a frame with built-in gutters; a motor turns the blades on motorized systems; rain drains down through the powder-coated aluminum posts, which sit on concrete footings below grade.
The parts of a louvered pergola: rotating aluminum blades, a frame with built-in gutters, posts that carry rain down, and concrete footings.

Louvered pergola vs. patio cover: which costs more?

A louvered pergola costs more than a fixed aluminum patio cover, because its roof moves: rotating blades, a crank or motor, and gutters built into the frame. An Alumawood-style patio cover runs $8,000–$22,000 installed in Arizona, against $12,000–$34,000 for a louvered 12×12. The patio cover gives up adjustable light and airflow for the lower price.

Compare the two: louvered pergolas and patio covers.

Do you need a permit for a louvered pergola in the Phoenix metro?

A louvered pergola often needs a permit in the Phoenix metro. In Phoenix, Scottsdale, Mesa and Gilbert, a detached structure under 200 square feet with no electrical work can usually skip the building permit, though setbacks still apply and Scottsdale still requires plan approval. Anything attached to the house, larger than that, or wired for motors, lights or fans needs a permit, so most motorized louvered pergolas need at least an electrical permit. Chandler is stricter: it treats an open-air shade structure as a ramada, which needs a building permit at any size.

CityThe rule that matters most
PhoenixDetached under 200 sq ft is exempt; wiring still needs a permit
ScottsdaleUnder 200 sq ft skips the permit but needs plan approval; max 30% of the rear yard
MesaDetached under 200 sq ft with no utilities is exempt; patio covers may need a permit
Gilbert200 sq ft or larger, wired, or attached needs a permit
ChandlerOpen-air ramadas need a permit at any size; 10 ft max height, 5 ft setbacks

HOA approval is separate from the city permit; if you have an HOA, you may need both before work starts. The pergola permit guide has the details by city.

How to get an accurate louvered pergola quote

  1. Measure the space you want covered, and note where the pergola would attach or stand.
  2. Decide on manual or motorized louvers, and which add-ons you want wired in.
  3. Check your HOA’s rules for size, color and height.
  4. Ask for an itemized, written quote that names the brand, wind rating and drainage, and lists what’s extra.
  5. Check the contractor’s license on the Arizona Registrar of Contractors website.

Sources

Prices are published figures, not quotes; checked September 29–30, 2026. Permit rules are paraphrased from each city’s own guidance, and they change, so the installer confirms them for your address.

Prices

Permit rules

Questions homeowners ask

How much is a 12×12 louvered pergola in Phoenix?

Published Phoenix-area prices run $12,000–$34,000 installed, from standard aluminum systems at the low end to premium brands such as StruXure and Renson at the high end. Motors, fans, lights and heaters add to that.

Is a motorized louvered pergola worth the extra cost?

If you’ll adjust the roof often, or want rain and wind sensors that move the blades automatically, motorized louvers are the convenient choice. A manual crank costs less and works well if you mostly set the blades once for the season.

Do louvered pergolas need a permit in Arizona?

Often. Most Valley cities exempt a detached structure under 200 square feet with no wiring, but motorized louvers need power, so most louvered pergolas need at least an electrical permit. Chandler requires a building permit for any open-air ramada.

How long does installation take?

It depends on permit review, HOA approval and product lead times, which can add weeks before work starts. Ask each installer for a current timeline in writing.

Is a louvered pergola cheaper than a patio cover?

No. For the same size, a fixed aluminum patio cover usually costs less, because its roof doesn’t move.

More answers in the pergola and patio cover FAQ, or see how a request works.

Get a written quote

Leave your name and number. A licensed installer calls you back, visits to measure, and quotes the job in writing before any work starts.

Call (602) 557-3625

Installation is done by a licensed Arizona contractor.