Gilbert permit guide

Gilbert pergola and patio cover permits

Installation is done by a licensed Arizona contractor.

Price your project

Typical installed range: $12,000–$34,000

Call (602) 557-3625

Installation is done by a licensed Arizona contractor.

Gilbert’s code FAQ puts the line at 200 square feet: smaller structures need no building permit, and anything 200 square feet or larger does. A permit is also needed for any electrical or plumbing, or for a structure connected to the house or another structure.

In a master-planned community, start with the HOA

Many Gilbert neighborhoods are master-planned communities with their own HOA design guidelines. The HOA’s conditions on size, color or height can change the plans you’d submit to the town, so line up its approval first. The two reviews are separate, and a town permit doesn’t stand in for HOA approval or the other way around.

Three things that trigger a Gilbert building permit

The town’s code FAQ, citing Land Development Code Section 2.106 B, sets out when a building permit is needed:

  • Size: 200 square feet or larger.
  • Utilities: any electrical or plumbing.
  • Connection: attached to the house or to another structure.

Setbacks apply either way. The FAQ answers the question for storage sheds, so confirm with the town how it applies to a pergola. For a louvered system, a motor, lights or fans, or attaching it to the house, brings the permit regardless of size; a freestanding manual 12×16, at 192 square feet, sits under the line.

Decision flow for Gilbert: in an HOA with design guidelines, get HOA approval first. A structure connected to the house or another structure needs a building permit, and so does any structure with electrical or plumbing. A detached structure under 200 square feet with neither needs no building permit, though setbacks apply. At 200 square feet or larger, a building permit is needed.
Gilbert in four questions: HOA first, then attachment, wiring and the 200 sq ft line.

What a Gilbert plan set includes, and what it costs

Gilbert’s checklist for residential additions, alterations and accessory buildings asks for a plan set with a site or plot plan, floor plan, elevations and electrical, plus structural calculations and product cut sheets. For an attached cover, the town publishes a Covered Patio Details sheet, which calls for removing stucco and flashing properly before the ledger goes on.

The permit fee comes from the project’s valuation, and plan review adds 65% of that fee. The smallest tier, for valuations of $1 to $1,100, is $50, and expedited plan review costs twice the regular plan review fee.

Gilbert: questions homeowners ask

Does a pergola attached to the house need a permit in Gilbert?

Yes. Gilbert’s code FAQ requires a permit for a structure connected to the house or another structure, for anything 200 square feet or larger, and for any electrical or plumbing.

What does Gilbert want in the plan set?

A site or plot plan, floor plan, elevations and electrical, plus structural calculations and product cut sheets. The town also publishes a Covered Patio Details sheet for attached covers.

Should I get HOA approval before the Gilbert permit?

Usually. Many Gilbert neighborhoods have HOA design guidelines, and the HOA’s conditions on size, color or height can change the plans you submit to the town.

More answers in the pergola and patio cover FAQ, or see how a request works.

Gilbert sources

Checked October 18, 2026. Rules change, so the installer confirms them for your address. Installed prices don’t change at the city line; the cost guides and calculator have the Valley ranges.

Related guides

Get a written quote

Leave your name and number. A licensed installer calls you back, visits to measure, and quotes the job in writing before any work starts.

Call (602) 557-3625

Installation is done by a licensed Arizona contractor.