Tempe permit guide

Tempe pergola, ramada and patio cover rules

Installation is done by a licensed Arizona contractor.

Price your project

Typical installed range: $12,000–$34,000

Call (602) 557-3625

Installation is done by a licensed Arizona contractor.

Tempe treats a ramada up to 200 square feet and 8 feet tall as an accessory structure that can sit in a rear, side or street-side setback. Anything larger or taller has to meet the full building setbacks, and a patio cover added to the house always needs a building permit.

The 200-square-foot, 8-foot line in Tempe

Tempe’s zoning code, ZDC 3-401, draws its line by size and height together. Up to 200 square feet and 8 feet tall, a ramada or small shed is an accessory structure, and it can sit in a rear, side or street-side setback as long as the separation the building codes require is kept. It can never sit in the front setback.

Go larger or taller and it becomes an accessory building. The city’s accessory building handout limits those to the height of the existing house and requires them to meet the district’s setbacks. Either way, every accessory structure counts toward the lot coverage maximum.

Plan of a Tempe lot: a small ramada up to 200 square feet and 8 feet tall sits in the rear setback, which Tempe allows for accessory structures in a rear, side or street-side setback with the building code’s separation; a larger ramada sits inside the buildable area, because anything larger or taller is an accessory building that meets the full building setbacks; the front setback is shaded as never allowed; every accessory structure counts toward lot coverage.
Tempe’s 200 sq ft and 8 ft limits decide whether a ramada can sit in a setback.

Patio covers: a building permit every time

Tempe requires a building permit before a patio cover is added to a house, and that applies to temporary structures as well as permanent ones. Plans that need structural review aren’t eligible for over-the-counter review. The city’s patio cover handout asks for two sets showing the site plan, foundation plan, sections and details, and roof framing plan, and requires an Arizona registered architect or engineer for some designs, including beam spans over 20 feet.

Submittals for single-family homes are fully electronic, through the Citizen Access Portal. The building permit fee comes from the construction valuation, and the plan review fee is 65% of it.

When a patio cover reaches into a setback

A patio cover that would encroach into a required building setback may need a use permit from the Community Development Planning Division, and it has to be obtained before the building permit is issued. The use permit fee for a single-family lot is $658 in the city’s July 2025 fee schedule. Build that step into the schedule when the yard is shallow and the cover runs toward the rear or side line.

Tempe: questions homeowners ask

Can a pergola sit in my side or rear setback in Tempe?

If it counts as an accessory structure, up to 200 square feet and no more than 8 feet tall, yes, as long as the building codes’ required separation is kept. It can’t go in the front setback.

Does a temporary patio cover need a permit in Tempe?

Yes. Tempe requires a building permit before a patio cover is added to a house, permanent or temporary.

What does a Tempe use permit cost?

For a single-family lot, $658 in the July 2025 fee schedule. A patio cover that encroaches into a required setback may need one before the building permit is issued.

More answers in the pergola and patio cover FAQ, or see how a request works.

Tempe sources

Checked October 18, 2026. Rules change, so the installer confirms them for your address. Installed prices don’t change at the city line; the cost guides and calculator have the Valley ranges.

Related guides

Get a written quote

Leave your name and number. A licensed installer calls you back, visits to measure, and quotes the job in writing before any work starts.

Call (602) 557-3625

Installation is done by a licensed Arizona contractor.